|
[Use
of the machine]
GE589A Model machine can be used to weave all kinds of socks which are made of cotton
yarn and elastic—mixed yarn automatically
four —colour mixed yarn. With the
help of shuttle, the number of design and colour can be
more than ten.
[Basic technical parameters and characters]
1、
diameter of needle bobbins :88.9mm.
2、
needle a mount:96-240
3、
turning speed of needle bobbins: less than 220
revolutions percent minute
4、
production:80-100 pairs18 hours
5、
movement of threed –inputing:five---path
thread---inputing by fourteen shuttles.
Eight of them are used to add yarn from four lines
6、
The structure of jacquard loom: The noodles are
selected in four ways .The patterns can be designed
according to need.
7、
Single transmission :the power of the electro
motor should be 0.25kw, conective transmission can also
be adopted.
8、
The needles are selected by computers and colour
can be mixed by electron. It is also convenient and
simple to design patterns, design and colour will be
varied and rich
9、
Computer program control :the liguid crystal
screen shows the information about the running state of
the machine. All the information is clear at a glace for
operators
10、The cooper gear and
the bottom, plato arpivoted on the needle bearing. They
can run lightly and steadly.
11、The desig of structure
is reasonable and the modeling is artistic,the spare
parts can be used commonly and are convenient to be
repaired. |
|
|
|
[Basic devices and distinguished features]
◇
GE208 Model All movement orders are controlled by
computer
◇ Morethan 20
pattern files and key board code.Can be stored in the
control box
◇ Twenty
colours. Can be weaved in the same row ,morever, the
range of jacquqrding can reach 1000 circles
◇ Once
the control box is powered,the computer can test the
hardware and software inside automatically
◇ Several
languages are stored for users
◇ The
vein and the dyed sick uein can be adjusted by cylinder
silk —
path device.<electron---style>
◇ when
the program is
at fault,the machine can stop running immediately and
the cause can be pointed out
◇ the
control box can be exchanged with the standard Dos
◇ the
data on the screen lan shows acternatine characters or
varied pattem fanction.
◇ the
computer program .can be restred by the function key in
the control box and return to the position where it
ended
◇ the
reversible proteetion device is also desigued in the
control box.
◇ Once short---cricuit occurs the protection
device .can be started to proteet the control box from
being destoried/ruined.
◇ with
the rapid needle---selected system,the speed can be
improved by 30%
◇ the
three---phase circuit such as 220v, 380v,415v and 440v
can be used to power it.The frequency .Can be 50Hz or
60Hz
|
|
